ARB Thailand | INTENSITY SOLIS LED LIGHTS

INTENSITY SOLIS LED DRIVING LIGHTS

A NEW INTENSITY OF DRIVING LIGHT

Filled with features, Intensity Solis driving lights are available in a Spot or Flood beam which come with interchangeable red and black die-cast side bezels. New to the Intensity range is the Solis’ 5-stage dimmability function, while the introduction of a highly tuned single-piece reflector and 165 watts of OSRAM LED performance bring it to the top of the class in light output.

Not just a remarkable performer, Intensity Solis driving lights represent a value proposition that is worth considering if you’re looking to add some additional driving lights to your vehicle.

EXPLORE THE FEATURES

36 OSRAM LEDS

5 STAGE DIMMABILITY VIA DIGITAL TOUCHPAD

SPOT & FLOOD VARIANTS

INTERCHANGEABLE BEZELS

FLOOD AND SPOT VARIANTS

The Intensity Solis range is available in dedicated spot and dedicated flood variations which connect to a centralized dimming controller in the wiring loom.

INTENSITY SOLIS

FLOOD LIGHT

(shown with black bezels)

INTENSITY SOLIS

SPOT LIGHT

(shown with black bezels)

Spot, Flood or a Combination?

How you set up your driving lights should reflect the type of driving and terrain you are driving in.

In areas of wide open land and fast roads such as Outback Queensland, New South Wales and the Northern Territory, a set-up of two spot lights will give you the best throw of light reaching as far down those long straight roads as possible.

For drivers who are predominantly in heavy bush with lots of winding roads such as the Victorian High Country, a set-up of two flood lights will fill the foreground, giving you great visibility to the side of the roads where roos like to hide and through the next close corner.

For most drivers, however, the combination of one spot (driver’s side) and one flood provides the best of both worlds. The single spot throws a strong direct beam down the road over 1/2 mile, while the flood beam fills the foreground and roadside what is often considered the optimal driving light pattern and output.

INTENSITY SOLIS SPECIFICATIONS

More < >

	SPOT	FLOOD
Input	10 – 30V	10 – 30V
Power	165 W	165 W
Current Draw	12.4A @ 13.2V	12.4A @ 13.2V
Output – Raw	18,178 lumens	18,178 lumens
Output – Effective	9,546 lumens	8,333 lumens
1 Lux Reading	1,032m	729m
Spread	6 degrees	11 degrees
Input Cable Length	450mm	450mm
Operating Temperature (°C)	-40°C to +65°C	-40°C to +65°C
Operating Temperature (°F)	-40°F to -149°F	-40°F to -149°F
Colour Temperature	5,700 Kelvin	5,700 Kelvin
Weight	3.3kg (7.27lbs)	3.3kg (7.27lbs)
Connector	4-pin AT – waterproof plug	4-pin AT – waterproof plug
Dimensions (mm)	225mm (w) x 220mm (h) x 120mm (d)	225mm (w) x 220mm (h) x 120mm (d)
Dimensions (inches)	8.9″ (w) x 8.7″ (h) x 4.7″ (d)	8.9″ (w) x 8.7″ (h) x 4.7″ (d)
Warranty	3 Years	3 Years

LIGHT OUTPUT AND DIMMABILITY

The combination of 6x 10 watt and 30x 4 watt performance OSRAM LEDs with a highly tuned reflector design has brought the Intensity Solis to the top of the class in light output.

Measured as a pair of spot beams, the Solis boasts 1 lux @ 4796 feet. Individually, a single flood beam will achieve 1 lux @ 2391 feet while one spot beam has an impressive 3385 feet throw.

Lights this bright need some level of containment, which is why Intensity Solis lights are sold standard with a 5-stage dimmability switch.

The ability to dim driving lights is perfect for when you’re approaching highly reflective road signs and is also really effective in low visibility scenarios (such as dust).

LIGHT PROFILE

While the Solis’ light output figures are impressive, what the light really offers the driver is so much greater!

The ultimate goal when designing a driving light is to get two light patterns, one spot and one flood, that offer light where you actually need it. To be most effective, a driving light needs to light the areas of the road and surrounds that match the terrain and driving style. Your driving lights need to be effective either as a matching pair (of spots or floods) or as a combination (one spot and one flood). Creating a light pattern that shines the furthest doesn’t always mean the light is useable – let alone optimal.

Driving lights need to have good central light and shouldn’t have harsh edges, but rather a good feathering of light that bleeds off. Additionally, the light should not be too white as it can cause additional eye strain for the driver, nor should the light throw too much intensity onto the foreground directly in front of the vehicle.

ARB Intensity Driving lights (V2 and Solis) are tuned to provide the optimum offering to suit the above criteria.

ARBIntensitySolis_LightOutputGraph_Flood_1096x378

ARBIntensitySolis_LightOutputGraph_Spot_1096x378

SQUATTING DESIGN STRENGTH

The squat shape of the new light better suits the bumper pan mounting and helps with lowering the center of gravity of the lights, making them more stable with less oscillation and vibrating which puts less stress on light and bumper mounting components (including tabs where applicable).

The Solis light is mounted in an all black, vertical-pivoting adjustable, cast aluminum cradle.

Looking at the side profile, ARB engineers have shaped the heat sink casting with a narrower section at the top of the light and a wider section towards the base. The result? A large light which fits a wide variety of applications with more room to fit in front of big tubes, like what is used on ARB Summit Sahara Bumpers.