ARB BULL BARS

Vital for rural and remote area travel, ARB bull bars will provide substantially improved protection for vulnerable mechanical components against animal strikes whilst providing a solid base for mounting other accessories like driving lights, winches and CB antennas.

ARB bars are superbly engineered and manufactured to not only maintain maximum functionality, but also to ensure they complement the look of the vehicle.

SUMMIT MKII BAR

The ARB Summit MKII Bar muscles up with the most innovative and advanced technology yet, all while fully integrating with Ford’s suite of advanced driver assist safety technology that are specific to the Everest.

The state-of-the-art Summit MKII Bar takes key components of its flagship namesake and kicks it up a notch with an ultra-modern design that’s constructed to turn heads.

FEATURES

  • Vehicle specific design suitable for the MY22 Ford Everest
  • Registered design of styling and design components
  • Durable steel construction for maximum protection
  • Incorporates ARB’s renowned multi fold upswept and tapered wing design for optimum strength and approach angle
  • 30mm radius on wings and centre section
  • 60.3mm outer frames and centre cross tube
  • Engineered, air bag compatible mounting system secures to the chassis via high tensile bolts
  • Split pan design for maximum strength and airflow
  • Extensive protection panels on centre and either side
  • Pressed form top pan and aluminium (powder coated matt black) winch cover panel
  • Twin ARB Jack or Hi-Lift Jack points located in the lower pan
  • Two aerial brackets located on the centre frame
  • Will accommodate Warn, Magnum, Bushranger, Smittybilt low mount model electric winches up to 10,000lb
  • Provision to accommodate ARB Intensity and Intensity Solis LEDs and a range of Bushranger and IPF lights
  • Includes ARB LED fog light, LED daytime running light, LED sequential indicators and clearance lights
  • Compatible with original equipment safety features
  • Bar adds approximately 165mm to the overall length of the vehicle
  • Approximate weight of the bar, chassis mounts and fitting kit is 79kg. Approximately 17kg is removed from the vehicle for fitment of the bar.
  • Metaprep primer for additional corrosion resistance
  • Finished in matt black powder coat with the option to colour code to vehicle colour

SUMMIT SAHARA MKII BAR

Boasting many of the features of the Summit Bar MKII, the ARB Summit Sahara Bar MKII offers a sleek yet rigid styling without sacrificing practicality.

The Sahara rendition also features either a polished alloy tube or a textured black tube kit with a LED light bar recessed into the top hoop, further underlining ARB’s commitment to fabrication excellence.

FEATURES

  • Vehicle specific design suitable for the MY22 Ford Everest
  • Registered design of styling and design components
  • Durable steel construction for maximum protection
  • Incorporates ARB’s renowned multi fold upswept and tapered wing design for optimum strength and approach angle
  • 30mm radius on wings and centre section
  • Engineered, air bag compatible mounting system secures to the chassis via high tensile bolts
  • Split pan design for maximum strength and airflow
  • Extensive protection panels on centre and either side
  • Pressed form top pan and aluminium (powder coated matt black) winch cover panel
  • Optional polished tube kit or textured black tube kit with integrated 20” LED light bar (requires ARB loom PN 3500810)
  • Twin ARB Jack or Hi-Lift jack points located in the lower pan
  • Two aerial brackets located on the centre frame
  • Will accommodate Warn, Magnum, Bushranger, Smittybilt low mount model electric winches up to 10,000lb
  • Provision to accommodate ARB Intensity and Solis LEDs and a range of Bushranger and IPF lights
  • Includes ARB LED fog light, LED daytime running light and LED sequential indicators and clearance lights
  • Compatible with original equipment safety features
  • Bar adds approximately 165mm to the overall length of the vehicle
  • Approximate weight of the bar, chassis mounts and fitting kit is 75kg. Approximately 17kg is removed from the vehicle for fitment of the bar
  • Metaprep primer for additional corrosion resistance
  • Finished in matt black powder coat with the option to colour code to vehicle colour

SPARTAN BAR

Designed to offer superior Frontal Protection, the SpartanBar is designed to suit the MY22 Ford Everest. Using an impact absorbing, resilient and incredibly durable polyethylene material, the SpartanBar leads with cutting-edge design and engineering which creates a bull bar that offers unsurpassed levels of safety for both driver and pedestrian.

FEATURES

  • Meets full Australian Standard AS 4876.1-2002. Including 3.2 Road User Protection
  • Weight savings provide improved fuel economy and reduced tyre, suspension and brake wear when compared to other alternatives
  • Suits all vehicle variants except Raptor
  • Superior frontal protection, due to the impact absorbing hollow construction
  • Airbag compatible
  • Compatible with all Ford safety and ADAS features
  • Compatible with SmartBar Under Vehicle Armour
  • Compatible with ARB Under Vehicle Protection
  • Compatible with ARB Forged Recovery Points
  • Removable high lift jack points available as an option with winch bar only
  • Antenna mount bracket supplied
  • Accommodates a large range of driving lights, including ARB Intensity Solis and Bushranger Night Hawk 9″ & 7″ driving lights
  • Winch bar accommodates up to 10,000lb winch, is compatible with Bushranger Revo, Warn Zeon and Evo winches
  • Styled to maintain the vehicle’s aesthetic appearance
  • Proudly designed and manufactured in Australia
  • Minimal repair costs after impact
  • Minimal maintenance
  • UV stabilised polymer for durability
  • Manufactured from environmentally friendly, recyclable polyethylene polymer
  • Available in black as standard, other colours available for large order quantities
  • Bar adds 210mm to vehicle length
  • Approach angle of 27o on centreline
  • Side wing under body protection
  • Under centre cover included to protect under the vehicle between the chassis rails
  • Not compatible with fitment of light bars

STEALTHBAR

Designed to offer superior Frontal Protection, the StealthBar is designed to suit the MY22 Ford Everest.

This StealthBar has been approved by Ford Australia as a Ford Licensed Accessory to be integrated into the vehicles safety systems and provide a high level of protection to the vehicle while being a planform to accommodate accessories such as driving lights, winch, antenna and high-lift jack points.

FEATURES

  • Meets full Australian Standard AS 4876.1-2002. Including 3.2 Road User Protection
  • Weight savings provide improved fuel economy and reduced tyre, suspension and brake wear when compared to other alternatives
  • Superior frontal protection, due to the impact absorbing hollow construction
  • Airbag compatible
  • Compatible with all Ford safety and ADAS features
  • Compatible with SmartBar Under Vehicle Armour
  • Compatible with ARB Under Vehicle Protection
  • Compatible with ARB Recovery Points
  • Removable high lift jack points available as an option with winch bars
  • Antenna mount bracket supplied
  • Accommodates a large range of driving lights, compatible with ARB Intensity Solis and Bushranger Night Hawk 9″ & 7″
  • Not compatible with light bars
  • Winch bar accommodates up to 10,000lb winch. Bar is compatible with Bushranger Revo, Warn Zeon and Evo winches
  • Styled to maintain the vehicle’s aesthetic appearance
  • Proudly designed and manufactured in Australia
  • Minimal repair costs after impact
  • Minimal maintenance
  • UV stabilised polymer for durability
  • Manufactured from environmentally friendly, recyclable polyethylene polymer
  • Available in black as standard, other colours available for large order quantities
  • Bar adds 230mm to vehicle length
  • Approach angle of 27o on centreline
  • Side wing under body protection
  • Under centre cover included to protect under the vehicle between the chassis rails

ARB SIDE PROTECTION

ARB side protection equipment acts as a shield for your vehicle’s vulnerable side panels, protecting them from rocks and road debris frequently encountered during remote area travel. Practicality is also increased, with access to both the cabin and roof top cargo made easier.

An exhaustive research and evaluation program is undertaken to ensure all side rails and protection steps are fully compatible with side air bags (where applicable) and don’t interfere in any way with modern vehicle safety systems.

SUMMIT SIDE RAILS AND STEPS

With an all new attachment system, larger steel tubing and anodised aluminium tread plate, the Summit side protection range encompasses the very best in design and vehicle protection.

ARB side protection equipment acts as a shield for your vehicle’s vulnerable side panels, protecting them from rocks and road debris frequently encountered during remote area travel. For customers without an ARB front bar or who simply don’t require a front rail, a return has been developed to enable fitment of a protection step only.

FEATURES

  • Design suits the MY22 Ford Everest
  • Registered design of styling and design components
  • Durable steel construction for maximum protection. Step, rail and return tube is Ø 60.3mm
  • Mounts to the vehicle chassis at three points per side
  • Compatible with side curtain airbags
  • Anodised step extrusion features ridges for additional grip
  • Metaprep primer for additional corrosion resistance
  • Finished in matt black powder coat with option to colour code to vehicle colour

ANODISED STEP EXTRUSION

A silver anodised extruded aluminium section with front to rear ridges is supplied with the front section selected. The extrusion supplied with the front rail section is supplied as separate left and right handed sections.

next_generation_ranger_side_rails_1096x480_01

UNDER VEHICLE PROTECTION

Providing an unrivalled safeguard for the underside of your vehicle, ARB’s Under Vehicle Protection (UVP) is laser cut, press formed and folded to provide superior strength.

Designed to the specifications of the Next Generation Ford Everest, it minimises the risk of damage to most vital components of the vehicle drivetrain.

FEATURES

  • 3mm pressed and folded sheet steel adds more strength than a standard folded sheet
  • Laser cut sheet steel
  • UVP panels zinc plated and powder coated in a silver textured finish
  • All steel components are protected with either powder coat or zinc plating
  • Recessed mounting bolts are protected and easy to remove for vehicle servicing
  • Front panel protects power steering, stabiliser bar and engine
  • Differential/sump panel protects front differential, front mounts and rear of engine sump
  • Under vehicle protection for the Next-Generation Ford Everest consists of transfer case panels. Each attaches with a chassis mounted transfer case
  • Compatible with ARB forged recovery points
  • Kit includes illustrated fitting instructions

SMARTBAR UNDER VEHICLE ARMOUR (UVA)

When traveling off road, the underbody of your 4WD is one of the areas most susceptible to damage. Made in Australia from durable and impact resistant crosslinked polymer, ARB’s Under Vehicle Armour (UVA) weighs significantly less than any aftermarket alternatives, gives greater coverage, is easy to install and remove for vehicle servicing and is compatible with the OE bumper, ARB Bull Bars and the ARB Forged Recovery Points.

Additionally, its vehicle-specific design is specially styled to complement the aesthetics of the Next-Generation Ford Everest while maintaining compatibility with the OE bumper, ARB bull bars and SmartBars.

Read More

FEATURES

  • Weight savings (approx. 22kg fitted weight) provide improved fuel economy and reduced tyre, suspension and brake wear when compared to other aftermarket alternatives
  • Compatible with ARB Forged Recovery Points
  • Easy disassembly for vehicle service access
  • Deep rib structure provides continual strength through entirety of the UVA
  • Reinforcing bracketry to protect under body components against impact
  • Heat resistant material
  • Non-corrosive UV stabilised crosslink polymer
  • Styled to complement the Next-Generation Ford Everest’s aesthetic appearance
  • Proudly designed and manufactured in Australia
  • Minimal repair costs after impact
  • Available in black
top